Experienced designers know that a well-designed high-performance air system is the most cost-effective and efficient system for many buildings. Thanks to industry and ASHRAE innovation, no other air-conditioning technology has advanced as rapidly over the last 10 years.
Read the full article here.
Condensing boilers use water vapour in the exhaust gases (a natural result of combustion) to pre-heat the incoming water and save energy in comparison to conventional boilers. They are usually 90% to 98% efficient, compared with the National Construction Code minimum requirement of 80% or 83%. Systems should be designed so that the water returning water from the heating system has a temperature between 30-55°C, to ensure full condensing capacity is achieved and maximin energy efficiency.
Features, Advantages:
• Increased Efficiency
• Improved Comfort & Control
• Reduced carbon footprint
• Space Saving
For more information, please Contact Us or call 1300 770 908.
Germicidal Ultraviolet-C (UV-C) devices installed on the downstream side of the cooling coil, reduce HVAC energy consumption and cleaning. The germicidal UV-C light continuously cleans coils of mould and organic build-up, bringing them back to peak efficiency. Benefits include better airflow, temperature and humidity control, improved heat transfer, and greater net cooling capacity. Energy savings of 20% and higher are common.
Benefits of UV-C;
• Increase IAQ
• Increase Heat Transfer
• Decrease Pressure Drop
• Decrease Microbial Growth
• Decrease Maintenance Costs
For more information please visit our UVC On Coil Cleaning page or Contact Us.
Studies confirm that Therma-Fuser™ Systems are the most efficient VAV approach, with building energy savings of 10%-47%, as compared to VAV box systems.
Therma-Fuser VAV diffusers allow for all low-pressure, low-energy system designs, which prevent overcooling and overheating. The thermostat-actuator and damper, located inside each unit, is designed to reduce the flow of supply air such that the volume entering the space is only the amount necessary to maintain a set temperature. By preventing overcooling and overheating, overall energy usage is greatly reduced.
Therma-Fuser VAV diffusers also have the lowest pressure drop of any VAV terminal, allowing for low-pressure systems and low energy fan motors.
No energy is required to operate the diffuser’s controls.
Sources of Energy Savings:
• Individual Temperature Control (small zones)
• Lower Turndown
• Eliminate Pressure Drop
• All low-pressure duct system
See Acutherm for more detailed information or contact ecoHVAC.
DuctSox’s new C-Series Fabric Diffuser is a drop plenum diffuser providing any application space with 360 degrees of even air dispersion with all of the advantages of using fabric. The C-Series utilizes DuctSox’s patented SkeleCore internal tensioning system eliminating any fabric flutter while maintaining the same appearance with or without air.
• Featuring 360° Airflow coverage, not limited to 4 or 6 sides.
• Available with two throw lengths, equal to typical drum diffusers for extended distances.
• Available flat or 30° angle diffusion with a round or square top inlet.
With lower material cost, low weight, lower ceiling load and easy installation The C-Series provides a better air distribution solution than comparable products. Application spaces that can’t use ductwork for physical or financial reasons, but still require air distribution are an ideal fit for the C-Series Diffuser.
Call us on 1300 770 90 or Contact Us for more information.
Introducing UltraSuite – The ceiling solution for modern healthcare Operating Theaters by Price Industries.
Ultrasuite is a customisable air distribution and lighting solution specifically engineered for hospital operating rooms.
Ultrasuite combines high-output LED lighting with precision equalised laminar airflow, eliminating the traditional “light ring” & opening valuable ceiling space for surgical equipment, while optimising contaminant removal from the surgical zone.
Conforming to all ASHRAE 170 requirements, Ultrasuite is the perfect combination of performance, aesthetics and efficiency.
For more information, please Contact Us.
Price Critical Controls have introduced the industry’s highest resolution Touchscreen Room Pressure Monitor (PMT) with a maintenance free pressure sensor.
The PMT will be fully supported by Price Critical Controls’ experienced application engineering team and global representation and will provide intelligent room pressure monitoring of critical environments with BACnet communication (BTL Certified) to the building management system.
Additionally, the touchscreen display features visual and audible alarms that signal unsafe conditions with illuminating sidebars, providing 180 degree visual status from anywhere in the corridor.
For more information about the industry’s first maintenance free pressure sensor please, Contact Us.
ecoHVAC are thrilled to announce that we have been appointed exclusive distributors for Price Industries, including Critical Environments and Critical Controls for the Aus/NZ regions.
For more information, visit our Price Industries page or our Contacts page.
Developed for freezers by DuctSox, the Kwik-Thaw Sleeve™ can be fitted to existing or new equipment operating with frosted coils. By collapsing when the unit goes into a heated defrost cycle, the sleeve keeps the heat inside the unit, speeding the thaw cycle time and reducing the amount of heat that would normally escape into the freezer.
Benefits:
• Helps coils thaw/quicker defrost cycle
• Reduces unintended product thawing in freezer
• Air porous fabric will not condensate during operation
• Adjustable outlet eases field adjustment for lower flow conditions
For more information visit our DuctSox Fabric Ducting page or Contact Us.
On behalf of the team at ecoHVAC, we would like to wish you all our Customers, Suppliers, Staff and their families a very Merry Christmas and a safe, happy New Year.
